0102030405
Chain Extender Hydroquinone Bis(2-Hydroxyethyl)ether (HQEE) CAS 104-38-1
Properties
• Vapor Pressure: 1.88E-06mmHg at 25°C
• Melting Point: 100-102 °C(lit.)
• Boiling Point: 380.001 °C at 760 mmHg
• Refractive Index: 1.54
• Flash Point: 183.618 °C
• PSA: 58.92000
• Appearance: white to off-white crystalline powder or flakes
• Density: 1.198 g/cm3
• Water Solubility: practically insoluble
• LogP: 0.42880
• Exact Mass: 198.08920892
Specification
Item |
Specifications | |
Moisture | 0.15% max | |
Hydroxyl Value | 545±15mg KOH/g | |
Water | <1 | |
Acetone |
4
|
|
Ethanol | 4 |
|
Ethyl Acetate | 1 | |
Ethane | <1 | |
Specific Heat Cal/g /ºC | 0.4 | |
Melt Density at 110ºC g/ml | 1.15 |
|
Viscosity at 40ºC, cp | 780 | |
Products Usage
HQEE is a symmetrical aromatic diol chain extender. It can improve tensile, hardness, resilience properties to MDI-polyurethane elastomers. HQEE/MDI is a PU elastomer series parallels MOCA/TDI. Finished products as: oil well seals, forklift tires, conveyor belt, hydraulic cylinder seals and many other PU products.
LCU elastomers require two principle components: a prepolymer terminated with reactive isocyanate groups and a difunctional active hydrogen-terminated chain extender. Prepolymer is a product based on the reaction of polyester or polyether with isocyanate (TDI,MDI,ADI). The chain extender is usually a short chain of diamine or diol. MDI prepolymers are usually extended with diols.
Package And Storage
Package:
25kg/carton drum or as your requirements.
Remark: Chemical composition and size can be optimized by the customers' requirements![c38ad3ec4177333741d5b744f90d82d4c5](https://ecdn6.globalso.com/upload/p/478/image_other/2024-03/65f3f5c22d01499108.jpg)
![c38ad3ec4177333741d5b744f90d82d4c5](https://ecdn6.globalso.com/upload/p/478/image_other/2024-03/65f3f5c22d01499108.jpg)
![集装geb](https://ecdn6.globalso.com/upload/p/478/image_other/2024-03/65f2c4b6ecb1c96762.jpg)
Storage:
Keep tightly closed. HQEE is hygroscopic and will change color under sunlight. Keep tightly closed and store in ventilated place. Keep away from moisture and sunlight
Safety Protection
Precautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.